Receiver / Mount
The Receiver is the tube bracket which attaches to the AR-POD™, and the Mount supports the Receiver and attaches to a vehicle.
|
Mount KitThe Mount Kit contains the Mount and necessary hardware to fasten to tube rack on an ATV.
|
Mount installed on rack
The combination of the hole pattern on the Mount and the clamping kit allows for a rigid attachment nearly anywhere on a tubular
ATV rack. |
plastic rack Mount Kit
Holes may need to be drilled and rubber inserts installed on plastic ATV racks. Specify the Plastic Rack Hardware with your Mount if this is required.
|
mount installed on plastic rack
The combination of the hole pattern on the Mount and the Plastic Rack Hardware kit allows for a rigid attachment nearly anywhere on a plastic ATV rack.
|
Receiver KitIf fabricating your own mount is desired, you can purchase the Receiver Kit. The image at the right shows a motorcycle with a fabricated mount supporting an AR-POD™ Receiver.
|
Open ArchitectureThe AR-POD™ design is intended to enable users to develop their own receiver / mount system. A couple 1 inch OD tubes with a 5/16 inch hole drilled in it for a lock pin is all that required to support the AR-POD™!
|